Nancy:Network
IP networks in use
You have to use a public network range to run an experiment between several Grid5000 sites.
Public Networks
- computing : 172.16.64.0/20
- ib/mx : 172.18.64.0/20
- virtual : 10.144.0.0/14
For Infinband (ib) see High Performance Networks
Local Networks
- admin : 172.17.64.0/20
- nat : 192.168.69.0/30
Network
Production Network
Room B056
Room C105A (Talc)
Physical link details
The following diagram show a view of the central router, a hp procurve 5406zl, named sgravillon1.
- All internal links are 10GB CX4.
- Renater link is 10GB optical fiber.
A1 | A3 | A5 | A7 | A9 | A11 | A13 | A15 | A17 | A19 | A21 | A23 |
---|---|---|---|---|---|---|---|---|---|---|---|
sgrapheneib | TALC-adm | - | grimoire | grog-eth1 | fgriffon1-eth0 | sgraphene1-ipmi | sgraphene3-ipmi | fgrelon2-eth1 | sgriffon2-ipmi | sgriffon3-ipmi | fgriffon1-eth1 |
A2 | A4 | A6 | A8 | A10 | A12 | A14 | A16 | A18 | A20 | A22 | A24 |
fgriffon2-ipmi | TALC-Prod | sgriffonib | grog-eth0 | fgriffon1-ipmi | fgrelon2-eth0 | sgraphene2-ipmi | sgraphene4-ipmi | LORIA | sgriffon1-ipmi | fgrelon1-eth0 | fgrelon1-eth1 |
Links color
Networks cables
- ## Red : Production Network
- ## Green : Managment Network
- ## Blue and White : Interco Managment
- ## Black : Server admin Network
Table color
- ## Red : LACP etherchannel link for fgrelon1 (trk1) (2x1Gbps)
- ## Green : LACP etherchannel link for grog (trk2) (2x1Gbps)
- ## Yellow : LACP etherchannel link for fgriffon1 (trk3) (2x1Gbps)
- ## Orange : LACP etherchannel link for fgrelon2 (trk4) (2x1Gbps)
High Performance Networks
Ethernet 10G on graphite nodes
Nodes
graphite-1
tographite-4
have one 10GB Ethernet card.
- Card Model : Intel X520 DP 10Gbit/s connexion directe/SFP+ + I350 DP 1Gbit/s.
- Driver :
ixgbe
Infiniband 20G on griffon nodes
Nodes
griffon-1
togriffon-92
have one 20GB Infiniband card.
- Card Model : Mellanox Technologies MT26418 [ConnectX IB DDR, PCIe 2.0 5GT/s] ( ConnectX ).
- Driver :
mlx4_ib
- OAR property : ib20g=YES ( Monika ).
- IP over IB addressing :
griffon-[1..92]-ib0
.nancy.grid5000.fr ( 172.18.65.[1..92] )
Switch
- Infiniband Switch 4X DDR
- Model based on Infiniscale_III
- 1 commutation card Flextronics F-X43M204
- 11 line cards 4X 12 ports DDR Flextronics F-X43M203
Interconnection
Infiniband network is physically isolated from Ethernet networks. Therefore, Ethernet network emulated over Infiniband is isolated as well. There isn't any interconnexion, neither at the data link layer nor at the network layer.
Infiniband 20G on graphene nodes
Nodes
graphene-1
tographene-144
have one 20GB Infiniband card.
- Card Model : Mellanox Technologies MT26418 [ConnectX IB DDR, PCIe 2.0 5GT/s] ( ConnectX ).
- Driver :
mlx4_ib
- OAR property : ib20g=YES ( Monika ).
- IP over IB addressing :
graphene-[1..144]-ib0
.nancy.grid5000.fr ( 172.18.64.[1..144] )
Switch
- Infiniband Switch 4X DDR
- Model based on Infiniscale_III
- 1 commutation card Flextronics F-X43M204
- 12 line cards 4X 12 ports DDR Flextronics F-X43M203
Interconnection
Infiniband network is physically isolated from Ethernet networks. Therefore, Ethernet network emulated over Infiniband is isolated as well. There isn't any interconnexion, neither at the data link layer nor at the network layer.
Ethernet 10G on griffon nodes
Nodes
griffon-11
togriffon-14
have one 10GB Myricom card, used as an Ethernet 10G adapter (Not Myrinet!)
- Card Model : Myri-10G ( [1] ) 10G-PCIE-8B-C NIC
- Driver :
myri10ge
- OAR property : eth10g=YES ( Monika ).
- Ethernet. IP addresses :
griffon-[11..14]-myri0
.nancy.grid5000.fr ( 172.18.65.[93..96] )
Interconnection
The nodes having myrinet configured are connected to the 10G Ethernet interfaces of the switches sgriffon|1-3] as following:
- griffon-11 to sgriffon1
- griffon-12 to sgriffon1
- griffon-13 to sgriffon2
- griffon-14 to sgriffon3
Grid5000 interconnect
Interconnect type
Link details
Note: All the used fiber cables are dedicated to our Grid'5000 interconnect. When it is said trunk on the above figure it means a more rigid garter.