TakTuk

Short Explanation about how it work

To speed up the execution of a command on a large number of nodes, TakTuk

• uses a tree to launch programs on all reserved nodes.
• initiates a few connections in parallel (the deployment window) and distributes the remaining deployment work to already

deployed peers using an adaptive work-stealing algorithm (Extract of A guide of TakTuk use by Guillaume Huard).

Therefore, for taktuk to operate correctly, peers should be able to connect to each other. By default, TakTuk use ssh connections. So to check if Taktuk execution will work, follow instructions on this page: Test key authentication

Using TakTuk with the base environment

Prerequisites

You have a reservation:

users@frontale.site.grid5000.fr:

oarsub -I -l nodes=4

Therefore you're on the reserved node:

users@node-15.site.grid5000.fr:

Connections from this node and between nodes with your account are possible

Using Taktuk to launch scripts

To launch scripts simultaneously on each node:

users@node-15.site.grid5000.fr:

taktuk -f $OAR_FILE_NODES broadcast exec [/home/site/user/testScript.sh]

Note: do not forget to type the characters [ and ]

By default, Taktuk displays a lot of informations but it might not be necessary. So you can add some options on command line to modify correctly the output [c'est pas trés clair pour l'utilité des options connector et status]:

-o connector -o status -o output='"$host: $line\n"'

Example:

To know if time clock are synchronised on each node (Result formated correctly)

users@node-15.site.grid5000.fr:

taktuk -o connector -o status -o output='"$host: $line\n"' -f $OAR_FILE_NODES broadcast exec [date]

Output

node-101.bordeaux.grid5000.fr: Fri Mar 23 09:38:46 CET 2007
node-23.bordeaux.grid5000.fr: Fri Mar 23 09:38:46 CET 2007
node-24.bordeaux.grid5000.fr: Fri Mar 23 09:38:46 CET 2007
node-67.bordeaux.grid5000.fr: Fri Mar 23 09:38:46 CET 2007
node-97.bordeaux.grid5000.fr: Fri Mar 23 09:38:46 CET 2007

To know cpu's installed on nodes:

plemoine@node-101:$ taktuk -o connector -o status -o output='"$host: $line\n"' -f $OAR_FILE_NODES broadcast exec ["cat /proc/cpuinfo | grep 'model name'"] | uniq

Output

node-101.bordeaux.grid5000.fr: model name       :                   Intel(R) Xeon(TM) CPU 3.00GHz
node-23.bordeaux.grid5000.fr: model name        : AMD Opteron(tm) Processor 248
node-24.bordeaux.grid5000.fr: model name        : AMD Opteron(tm) Processor 248
node-67.bordeaux.grid5000.fr: model name        :                   Intel(R) Xeon(TM) CPU 3.00GHz
node-97.bordeaux.grid5000.fr: model name        :                   Intel(R) Xeon(TM) CPU 3.00GHz

Using TakTuk with your own environment and no taktuk installation on it

Prerequisites

Starting to make a reservation:

users@frontale.site.grid5000.fr:

oarsub -I -l nodes=4 -q deploy

Deploy environment:

users@frontale.site.grid5000.fr:

kadeploy -p part -f $OAR_FILE_NODES -e sid-x64-nfs-1.0

Using Taktuk to launch programs

[Ca ne me dit pas ce qu'il faut faire pour executer sans taktuk, mais seulement comment executer en tant que root : à mon avis, il manque une étape] To execute command as root for update , you have to use the following option: "-l root" as the first one used on the command line:

users@frontale.site.grid5000.fr:

taktuk -l root -s -o connector -o status -o output='"$host: $line\n"' -f $OAR_FILE_NODES broadcast exec ["apt-get update"]